Unique Broadband Systems Ltd. DRU2KW User Manual

Manual No. x75mk3-11

x75-man-Rev11-0815.indd

Load Over Current – This alarm will activate if the load current rises above this 

threshold.  The alarm will be canceled when the current falls below the cancellation 

threshold.
Battery Over Current – This alarm will activate if the magnitude of the battery 

current rises above this threshold.  Thus the alarm will activate either during charge 

or discharge if the threshold is exceeded.  The alarm will be canceled when the 

current falls below the cancellation threshold.
Battery On Discharge – This alarm will activate if the discharge current from the 

battery rises above this threshold.  When the discharge current falls below this level 

(or the current becomes a charging current) the alarm will be canceled.

These are not used in X75.

Minimum number of rectifiers – If the number of rectifiers detected in the system 

falls below this value then an alarm will be activated.  If the number of rectifiers 

increases so that it is equal to or above this value then the alarm will be cleared.