Zebra HW46211 User Manual

Page 2-40

110XiIIIPlus Maintenance Manual

13185L-002 Rev. A 1/24/06

Section 2

Operations Overview

Delimiter Character

The delimiter character is a two-digit hex value. Once configured, this character acts as a

parameter place marker in ZPL/ZPL II. Refer to the ZPL II Programming Guide for more

information.

Press the left oval key to move to the next digit position, and press the right oval key to

increase the value of the digit. (The displayed H is not entered as part of the value.)

Press NEXT/SAVE to display MODE.

Select ZPL Mode

The printer accepts label formats written in either ZPL or ZPL II. Refer to the

ZPL II Programming Guide for more information on the differences between ZPL and

ZPL II.

The printer remains in the selected mode until changed by this front panel instruction or by

sending the ^SZ ZPL/ZPL II command to the printer.

Press the right or left oval key to display other selections.

Press NEXT/SAVE to display MEDIA POWER UP.

Power Up and Head Close Parameters

Media Power Up

Turning the printer On (l) determines the action of the media. Calibration recalibrates the

media and ribbon sensors, Feed feeds the label to the first web, Length calculates the

length of the label, and No Motion means the media does not move.

Press the right or left oval key to display other selections.

Press NEXT/SAVE to display HEAD CLOSE.

Default: 2C (comma)

Range: 00–FF (Exclude the values indicated on the ASCII Code Chart.)

Default: ZPL II

Selections: ZPL II, ZPL

DELIMITER CHAR

<,>

ZPL MODE

ZPL II

Default: Calibration

Selections: Feed, Calibration, Length, No Motion

MEDIA POWER UP

CALIBRATION