Metra 99-7803G User Manual

99-7803G

Kit Assembly

Dash Disassembly

(Figure G)

(Figure A)

(Figure H)

(Detail)

Double DIN head unit provisions
1. Mount the radio brackets to the

radio trim panel with four of the

supplied #8 screws. (Figure A)

2. Slide the DDIN aftermarket radio

into the kit assembly and secure

with screws supplied with the

radio. (Figure A)

Continued on next page

3

7. Unsnap and remove upper panel

(including a/c vents) and remove

(3) Phillips screws behind the

panel. (Figure G)

Tip: You can use a hook tool to

grasp the panel inside of the vent

and pull toward the rear of the

vehicle. Be careful not to

scratch the panel.

8. Unclip and remove radio/climate

control assembly.

9. Cut and remove the center section

of the dash cavity. (Figure H)

Be sure to leave the outside clip

slots intact. (See detail)

Continue to kit assembly

Step 1.

Step 2.

Cut close without

cutting into clip slot

Remove shaded area