Thecus All-Purpose Storage Server N1200BR Leaflet

 

 
 

71 

1.  The network folder is currently mapped using a different user name and 

password. To connect using a different user name and password, first 

disconnect any existing mappings to this network share. 

 

2.  The mapped network drive could not be created because the following 

error has occurred: Multiple connections to a server or shared 

resource by the same user, using more than one user name, are 
not allowed. Disconnect all previous connections to the server or shared 

resource and try again. 

 
To check out existing network connections, type net use under the DOS prompt.  

The N1200 uses its chassis to dissipate heat, and feeling warm to the touch is 
completely normal. As such, make sure that the N1200 is left in a well-ventilated 
area to avoid overheating the unit. 

 

From the System menu, choose the Factory Default item and the Reset to 
Factory Default screen appears. Press Apply to reset the N1200 to factory 

default settings. 
 

 
 

 

The administrator is able to select an NTP Server to keep the N1200’s time 
synchronized. However, if the N1200 can not access the Internet, you may 

encounter a problem when setting the Time and Time Zone. If this happens: 
  

1.  Login to the Web Administration Interface. 
 
2.  Navigate to System > Time. 

3.  Under NTP Server, select No. 

 
4.  Set the Date, Time, and Time Zone. 

 

5.  Click Apply. 

 
In addition, if the N1200 is able to access the Internet and you want to keep the 
NTP Server clock.isc.org by default, please make sure the DNS Server is 
correctly, thereby allowing the NTP Server name to correctly resolve. (See 
Network > WAN > DNS Server) 

This procedure is meant to provide a simple and quick way to identify which part 

of the N1200 has failed. 
 

1.  Don’t insert a hard disk into the N1200. Attach the power cord and then 

reset the IP address and admin password to the default settings by doing 

the following: