Crc Kontakt Chemie Radio projection clock Colour changing (L x W x H) 47 x 127 x 90 mm PCR19 Data Sheet

With the "CONTINUE BRIGHT" slide switch (4) you can switch between two modes of
operation:
• Continuous Operation

The projector and the background lighting of the LC display are both continuously active in
this setting.



This is only possible if the enclosed plug-in power unit is used. This feature is
not possible if the device is powered by batteries alone.
Connect the plug-in power unit to a mains power outlet (230V~/50Hz) and
connect the low voltage plug to the corresponding socket (5) on the Radio
Projection Clock.

Pressing the "LIGHT/SNOOZE" button (1) activates the projection for 5 seconds. The
background lighting of the LC display is activated simultaneously.

Swivelling the projector
The projector can be swivelled approx. 90° forward and backward. A mechanical stop prevents
it from being turned too far. Do not use any force.
Rotating the Display
The "ROTATE" (11) rotary control allows you to rotate the display by approx. 90° to the left or
right.
Mirroring the Display
If the "ROTATE" rotary control range is not sufficient, the "FLIP" button can be used to turn the
image through 180°.
Focussing the Display
Depending on the distance of the projector from the surface on which you intend to project the
display, you can set the image sharpness using the "FOCUS" rotary control (13).