Intel i3-2328M FF8062701275100 Data Sheet

94

Datasheet, Volume 1

1.

Refers to a component device that is not assembled in a board or socket and is not electrically connected to 

a voltage reference or I/O signal.

2.

Specified temperatures are not to exceed values based on data collected. Exceptions for surface mount 

reflow are specified by the applicable JEDEC standard. Non-adherence may affect processor reliability.

3.

T

absolute storage

 applies to the unassembled component only and does not apply to the shipping media, 

moisture barrier bags, or desiccant.

4.

Component product device storage temperature qualification methods may follow JESD22-A119 (low temp) 

and JESD22-A103 (high temp) standards when applicable for volatile memory.

5.

Intel branded products are specified and certified to meet the following temperature and humidity limits 

that are given as an example only (Non-Operating Temperature Limit: -40 °C to 70 °C and Humidity: 50% 

to 90%, non-condensing with a maximum wet bulb of 28 °C.) Post board attach storage temperature limits 

are not specified for non-Intel branded boards.

6.

The JEDEC J-JSTD-020 moisture level rating and associated handling practices apply to all moisture 

sensitive devices removed from the moisture barrier bag.

7.

Nominal temperature and humidity conditions and durations are given and tested within the constraints 

imposed by T

sustained storage 

and customer shelf life in applicable Intel boxes and bags.

• The DC specifications for the DDR3 signals are listed in 

Sideband and Test Access Port (TAP) are listed in 

•

 lists the DC specifications for the processor and are valid only while 

meeting specifications for junction temperature, clock frequency, and input 
voltages. Care should be taken to read all notes associated with each parameter. 

• AC tolerances for all DC rails include dynamic load currents at switching frequencies 

up to 1 MHz.

T

absolute storage

The non-operating device storage 

temperature. Damage (latent or otherwise) 

may occur when exceeded for any length of 

time.

-25 °C

125 °C

1, 2, 3, 4

T

sustained storage

The ambient storage temperature (in shipping 

media) for a sustained period of time

-5 °C

40 °C

5, 6

T

short term storage

The ambient storage temperature (in shipping 

media) for a short period of time.

-20 °C

85 °C

RH

sustained storage

The maximum device storage relative humidity 

for a sustained period of time.

60% at 24 °C

6, 7

Time

sustained storage

A prolonged or extended period of time; 

typically associated with customer shelf life.

0 Months

30 

Months

7

Time

short term storage

 

A short-period of time;

0 hours

72 hours