Bosch Appliances Home Security System D7412G User Manual
D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN
EN | 47
Bosch Security Systems | 1/04 | 47775E
CC# Supervised
Default:
See
Program Record Sheet
Selection:
Yes or No
Yes
Only one command center can be installed for
this CC SDI address.
this CC SDI address.
No
More than one command center can be
installed using this CC SDI address with the
same address DIP switch setting.
installed using this CC SDI address with the
same address DIP switch setting.
Supervise this SDI address and generate Trouble
SDI Reports and local trouble annunciation if a
problem occurs with this command center or the
SDI bus.
SDI Reports and local trouble annunciation if a
problem occurs with this command center or the
SDI bus.
Command centers sharing the same
address setting display the same text and
emit the same tones regardless of which
command center keys are pressed.
address setting display the same text and
emit the same tones regardless of which
command center keys are pressed.
Trouble SDI # Reports are always
reported as Area 1, Account 1 Events
regardless of the area the SDI device is
assigned.
reported as Area 1, Account 1 Events
regardless of the area the SDI device is
assigned.
0101
0101
0101
0101
0101
When this prompt is Yes, you cannot have
duplicate DIP switch settings.
duplicate DIP switch settings.
0101
0101
0101
0101
0101
When a D1260 Alpha V Command Center
is assigned to a command center address,
you must program CC# Supervised as
Yes.
is assigned to a command center address,
you must program CC# Supervised as
Yes.
CC# Area Assign
Default:
1
Selection:
1 to 8
Blank is not a valid entry.
Enter the area number where you are installing this
command center or command centers with this
address and the same DIP switch settings.
command center or command centers with this
address and the same DIP switch settings.
CC# Scope
Default:
See
Program Record Sheet
Selection:
Panel Wide, Custom, No Keypad,
Area, and Account
Area, and Account
Panel
Wide
Wide
A panel-wide command center can
view information and perform Arming
and Disarming functions for all areas in
the control panel. A panel-wide
command center can cross account
boundaries. This is normally used with
a master area.
view information and perform Arming
and Disarming functions for all areas in
the control panel. A panel-wide
command center can cross account
boundaries. This is normally used with
a master area.
Account
An Account command center can view
information, and perform Arming and
Disarming functions for all areas with
the same
information, and perform Arming and
Disarming functions for all areas with
the same
A# Acct Number
, in Area
Parameters. This is normally used for
an associate area.
an associate area.
Area
An Area command center is restricted
to viewing information and
Arming/Disarming functions for the
area to which it is assigned.
to viewing information and
Arming/Disarming functions for the
area to which it is assigned.
Custom
A Custom command center has no
command center restrictions.
command center restrictions.
No
Keypad
Keypad
No command center installed at this
address.
address.
CALL FOR SERVICE
displays, indicating the control panel is
not polling this address.
not polling this address.
This program item is used to define the areas
affected when this command center is armed, the
areas this command center can view, and the areas
this command center can move to.
affected when this command center is armed, the
areas this command center can view, and the areas
this command center can move to.
Press the [SPACE] bar to scroll through the
selections. Press [ENTER] when the correct selection
appears in the display.
selections. Press [ENTER] when the correct selection
appears in the display.
In applications where command centers
include the scope of more than one area,
active alarms in remote areas must be
acknowledged prior to arming or disarming
the local area.
include the scope of more than one area,
active alarms in remote areas must be
acknowledged prior to arming or disarming
the local area.
The following prompts are visible ONLY
when you program CC## Scope to
Custom. If the scope was previously
programmed to be other than No Keypad,
default settings based on the previous
scope appear. Prior to exiting a custom
program, check each area and ensure it is
properly enabled and disabled.
when you program CC## Scope to
Custom. If the scope was previously
programmed to be other than No Keypad,
default settings based on the previous
scope appear. Prior to exiting a custom
program, check each area and ensure it is
properly enabled and disabled.