Hughes DW6000 User Manual

1. Take the pedestal base in one hand and the DW6000 in the 

other. Orient them as shown in Figure 7. The Power LED will 
be at the bottom.

2. The pedestal base has two curved ridges, one on each side of 

its opening. See Figure 8. The DW6000 has six guides that 
slide along these ridges. See Figure 9. Locate the ridges and 
the two guides at the front of the pedestal base.

3. Align the guides with the ridges.
4. Gently slide the guides along the ridges until the DW6000 

clicks into place.

Note:

If you need to remove the DW6000 from the pedestal 

base, pull up and back on the tab on the back of the base. See 
Figure 10. You can then slide the base off the DW6000.

Figure 7: Orienting pedestal base and DW6000