Datacard Group RL90 User Manual

Status Monitor

RP90 Plus E and RL90 User Guide

29

The Media Setting tab shows:

The type of Ink ribbon in the printer, the lot 
number of the ribbon, and the number of panel 
sets included in the ribbon. The printer 
provides this information and it cannot be 
changed. If the printer cannot recognize the 
type of ink ribbon, one of the following reasons 
is displayed:

Settings to view or change the type and thickness of cards being used.
—  For Material, choose PET-G, PVC, or PET (0.25mm). The values for retransfer 

) change 

depending on the selected card type. 

—  For Thickness, choose:

—  Standard for cards 0.76mm (0.030in) thick
—  Thin for cards 0.25mm (0.010in) thick

A setting to view or change the type of Retransfer (INTM) film. 

Make sample cards to verify settings before using cards of a different thickness.

Print on one side of thin cards. Do not print on both sides.

252: Invalid TAG Data

The data for the ink ribbon is incorrect. Replace the ink ribbon and try again.

253: Defective TAG

The printer did not recognize the print ribbon data. Replace the ink ribbon and 
try again.

254: No TAG

The printer could not read the print ribbon data. Make sure the ink ribbon has 
been loaded correctly. See 

.

255: Defective R/W

The printer is defective. The printer must be repaired.