Bosch Appliances Home Security System DS7400XIV4-EXP User Manual

DS7400XiV4-EXP | User Guide | 10.0  

Testing Your System 

EN | 30 

 

 

Bosch Security Systems | 6/05 | 4998154961B 

 

10.5  Event History Readback 

The History Buffer stores the last 400 events in memory. The text keypad can display all of these events. The 
LED keypad only displays the zones (1 to 16) that alarmed since the last Event History Readback. If you perform 
this test from a Master keypad, the keypad must be in Single Partition Mode. The RF3341 keypad cannot display 
history events. 

 

Table 29: Event History Readback 

 

 

 

 

Type of Test  

Command Sequence 

What Happens 

What To Do 

Event History 
Readback 

[PIN][#][8][9] 

 

•  The last event to take place is displayed. * 

•  The zone LEDs flash for any zones that alarmed 

since the last Event History Readback. ** 

Note: To read the System Error Displays, follow the 
instructions in Section 9.0 Error Displays. 

•  Scroll through the events 

using the [9], [6], and [#] 
keys. * 

•  Exit from Event History 

using [PIN][#]. 

* Text keypad only 

** LED keypad only 

 

Scrolling through the History Events (Text Keypad Only) 

Press [#] to scroll back through the history line by line.  

Press [9] to scroll in reverse chronological order by event.  

Press [6] to scroll back through the events (toward the most recent) by event.  

Each event consists of two or three lines or display screens. The first line/screen is the event title and user. The 
second line/screen is the date of the event or the change being made. If there is a third line/screen, it will be the 
date of the change. 

To exit the Event History Mode, press the [*] key or wait 20 seconds and the keypad exits automatically. 

When performing Event History Readback from a Master keypad, each area displays its own history.