Bosch NETP066SUC Manual

10

The cooktop is equipped with a residual heat indicator 

for each element. It shows you which elements are still 

hot. Avoid touching the indicated elements.
If an 

• 

is shown on the display, the element is still hot. 

You could use it, for example, to keep a small quantity of 

food warm or to melt a chocolate coating. As the element 

continues to cool, the display changes to 

œ

. The display 

goes out once the element has cooled sufficiently.
The residual heat indicator will automatically come on 

after a power failure. The display lights up for 

approximately 30 minutes.

Use the main switch to turn on the electronic circuitry for 

the control panel. The cooktop is now ready to use.

Turning the cooktop on
Touch the On/Off touch key until the indicator above the 

main switch and the symbols 

$ 

for the heating elements 

turn on.

Turning the cooktop off
Touch the On/Off touch key. The __ indicator goes out. 

The cooktop is switched off. The residual heat indicators 

will remain on until the elements have cooled off 

sufficiently.
Note:  The cooktop switches off automatically when all 

the elements have been switched off for more than 

10 seconds.
If residual heat is still present when the cooktop is turned 

on, 

•

/

œ

 will appear in the heating element display.

Use the main switch to turn on the electronic circuitry for 

the control panel. The cooktop is now ready to use.

Turning the cooktop on
Touch the On/Off touch key until the indicator above the 

main switch and the symbols 

$ 

for the heating elements 

turn on.

Turning the cooktop off
Touch the On/Off touch key. The __ indicator goes out. 

The cooktop is switched off. The residual heat indicators 

will remain on until the elements have cooled off 

sufficiently.
Note:  The cooktop switches off automatically when all 

the elements have been switched off for more than

15 seconds.
If residual heat is still present when the cooktop is turned 

on, 

•

/

œ

 will appear in the heating element display.

$

Single element

Always use cookware of a suitable size.

ð

Dual element

The size of these elements can be matched to your pan size. The heating element must 

be turned on.
Turning off the outer heating ring: Touch 

ö

. The 

ð

 display will turn off.

Adding: Touch 

ö

 again. The 

ð

 display will turn on.

ò

Triple element 

(NETP666SUC only)

On this element you can turn the medium and large heating rings off. The heating 

element must be turned on.
Turning off the outer heating ring: Touch 

ö

. The 

ò

 display will turn off.

Turning off the middle heating ring: Touch 

ö 

again. The 

ð

 display will turn off.

When you turn the heating element on again, all of the heating rings will be on.

à

Bridge element 

(NETP666SUC only)

The Bridge element combines two individual heating elements into one long griddle zone. 

This configuration is ideal for griddles and large pans.
Note: : Do not use cookware larger than 17" x 10" (432 x 254 mm).
Turning on the Bridge element: Touch one of the two 

$

 touch keys for selecting the 

heating element, then touch the 

à

 key. The 

à

 symbol will appear; both heating elements 

are now selected. 

‹

 appears in both displays. Within the next 10 seconds select the 

desired heat setting (1-9). The Bridge element and both individual heating elements are 

now on.
Changing the heat setting: Touch one of the two 

$

 touch keys for 

selecting the Bridge element, and set the new heat level within the next 10 seconds.
Turning off the Bridge element feature: Touch one of the two 

$

 touch keys for selecting 

the Bridge element, and select 0 from the number keys. 

‹

 appears in both displays. The 

heating elements will turn off and the residual heat indicator will appear.