Bosch d9412gv3 User Manual
D9412GV3/D7412GV3 | Program Entry Guide | 4.0 Schedules (Skeds)
EN | 105
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
4.0 Schedules
(Skeds)
4.1 Windows
Use this programming module to define the windows
for Opening and Closing and User Access.
4.1.1 Opening and Closing
Use these windows to set a schedule for disarming
and arming. The disarming and arming schedules
have several independent features:
Suppress normal Opening or Closing Reports
for Opening and Closing and User Access.
4.1.1 Opening and Closing
Use these windows to set a schedule for disarming
and arming. The disarming and arming schedules
have several independent features:
Suppress normal Opening or Closing Reports
when A# Disable O/C in Windows is
programmed as Yes.
programmed as Yes.
Generate a Fail to Open Report if the area is not
disarmed on schedule when A# Fail To Open is
programmed as Yes.
programmed as Yes.
Provide a warning tone and a PLEASE CLOSE
NOW display at the keypad when it is time to arm
the area.
the area.
Generate a Fail to Close Report if the area is not
armed on schedule when A# Fail To Close is
programmed as Yes.
programmed as Yes.
Automatically arm the area at the end of the
Closing Window when A# Auto Close is
programmed as Yes.
programmed as Yes.
Opening and closing schedules can be set up
independently. For example, if you want to use
features provided only by Closing Windows, leave
times at default (00:00) in the Opening Windows
prompts and program Closing Window times.
A worksheet is provided at the end of this section for
your convenience. Following the worksheet are
examples of programming Opening and Closing
Windows for particular applications (refer to Table 33
on page 111 through Table 37 on page 112).
About the program record sheet: A column labeled
Sked # is found in the program record sheet provided
with the control panel. The numbers in that column
appear in D6500 and D6600 reports and local printer
reports when the window Begin Time executes.
Window selections 1 through 8 correspond with odd-
numbered Skeds 41 through 55 for Open Window
and correspond with even numbered Skeds 42
through 56 for Close Window. For example, when the
Opening Window for Window 1 executes, a Sked 41
Executed event is generated. Refer to Table 29.
independently. For example, if you want to use
features provided only by Closing Windows, leave
times at default (00:00) in the Opening Windows
prompts and program Closing Window times.
A worksheet is provided at the end of this section for
your convenience. Following the worksheet are
examples of programming Opening and Closing
Windows for particular applications (refer to Table 33
on page 111 through Table 37 on page 112).
About the program record sheet: A column labeled
Sked # is found in the program record sheet provided
with the control panel. The numbers in that column
appear in D6500 and D6600 reports and local printer
reports when the window Begin Time executes.
Window selections 1 through 8 correspond with odd-
numbered Skeds 41 through 55 for Open Window
and correspond with even numbered Skeds 42
through 56 for Close Window. For example, when the
Opening Window for Window 1 executes, a Sked 41
Executed event is generated. Refer to Table 29.
Table 29: Window Selections
Selection
Sked
#
#
Window Sked
# Windo
w
1
41
Open
42
Close
2 43
Open
44
Close
3
45
Open
46
Close
4 47
Open
48
Close
5
49
Open
50
Close
6 51
Open
52
Close
7
53
Open
54
Close
8 55
Open
56
Close
Window
Default:
1
Selection: 1 to 8
Enter the window number you want to program.
W# Sunday
Default:
No
Selection:
Yes or No
Yes
Activate this window on Sundays.
No
Do not activate this window on
Sundays.
Sundays.
This prompt and the next six day-of-the-week prompts
select the days of the week the Opening and Closing
windows are active.
Exceptions:
To prevent the windows from activating on certain
days of the year, program Xept Holiday as Yes, and
enable at least one Holiday Index. When Xept
Holiday is Yes, the window executes on the days of
the week programmed unless the Holiday Index
designates the date as a holiday.
If Opening and Closing Windows are only needed on
certain days of the year, do not program the windows
to execute on any days of the week. Instead, program
Xept Holiday as No and select a Holiday Index with
the days of the year you want the window to be active.
select the days of the week the Opening and Closing
windows are active.
Exceptions:
To prevent the windows from activating on certain
days of the year, program Xept Holiday as Yes, and
enable at least one Holiday Index. When Xept
Holiday is Yes, the window executes on the days of
the week programmed unless the Holiday Index
designates the date as a holiday.
If Opening and Closing Windows are only needed on
certain days of the year, do not program the windows
to execute on any days of the week. Instead, program
Xept Holiday as No and select a Holiday Index with
the days of the year you want the window to be active.