ZyXEL Communications n/a User Manual

Chapter 21 WAN Commands

DSL & IAD CLI Reference Guide

156

• Saves the current configuration.

21.3 wan backup Commands

Use these commands to configure the ZyXEL Device’s WAN backup settings.

ras> wan atm vchunt active yes

ras> wan atm vchunt add 2 30 33 63

ras> wan atm vchunt display

(1) Configure Buffer

Flags: Active

RN VPI VCI service

----------------------

1 30 33 63H

(2) RemoteNode (Read Only)

RN VPI VCI | RN VPI VCI | RN VPI VCI | RN VPI VCI |

---------------------------------------------------------------

1 8 35 | 2 0 0 | 3 0 0 | 4 0 0 |

5 0 0 | 6 0 0 | 7 0 0 | 8 0 0 |

9 0 0 |

(3) VC Hunt Table: (User setting)

Flags: Active(1)

RN VPI VCI serv| RN VPI VCI serv| RN VPI VCI serv| RN VPI VCI serv

---------------------------------------------------------------

1 0 33 3fH| 1 0 35 3fH| 1 1 35 3fH| 1 8 32 3fH|

1 0 101 3fH| 1 0 50 3fH| 1 0 32 3fH| 1 14 24 3fH|

1 0 38 4H| 0 0 0 0H|

(4) WebRedirect: Enable

ras> wan atm vchunt save

ras>

Table 63 wan backup Commands

COMMAND

DESCRIPTION

wan backup 1checkip <ip-address>

Specifies the first IP address to check for
connectivity (when icmp checking is activated).

wan backup 2checkip <ip-address>

Specifies the second IP address to check for
connectivity (when icmp checking is activated).

wan backup 3checkip <ip-address>

Specifies the third IP address to check for
connectivity (when icmp checking is activated).

wan backup checkmech <icmp|dsllink>

Specifies the method the ZyXEL Device uses to
check the DSL connection.

icmp

: periodically ping the checkip IP addresses.

dsllink

: check the connection to the DSLAM.

wan backup dialbackup active

<0:off|1:on>

Activates or deactivates dial up backup.

wan backup dialbackup ATcommand

answer <command>

Sets the AT command used to answer a call.

wan backup dialbackup ATcommand dial

<command>

Sets the AT command used to make a call.

wan backup dialbackup ATcommand drop

<command>

Sets the AT command used to end a call.