SVAT Electronics CLEARVU11 User Manual

now you can see

CLEARVU11

36

In Network Setup, press 

ENTER to call up Advanced 
Network Setup as shown 
when the highlighted 
option is Adv.

The Advanced Network Setup allows the administrator to set advanced network parameters. If the user is not familiar 
with network administration, please DO NOT modify the items in this dialog.

The general operations are as below:

•

▲▼- Press these buttons to select the items.

•  ESC (MENU/ESC) -Press this button to escape from this screen, and return to Network Setup display. If the Save 

dialog is shown, press ENTER to exit and save, ESC (MENU/ESC) to exit without saving.

Following is a brief description for each item and its specific operations:

•  Control Port – the control port for remote access. The default value is 67. Please follow the Text Input method 

described in the begining of this manual to modify this item.

•  Data Port – the data port for remote access. The default value is 68. .
•  HTTP Port – the HTTP (web page) port for remote access. The default value is 80..
•  WAP Picture quality press+/- to change the initial value. Options are normal, fine, and superfine.

Note: If the Control Port or Data Port is not available or accessible during remote access, the system will reset 

the ports to their default values, i.e. 67/68.

NOTE: If the control port or data port is not available or accessible during remote access, the system will reset 

the ports to their default values, i.e. 67/68.