SVAT Electronics CLEARVU11 User Manual

now you can see

CLEARVU11

37

In Menu display, press 

▲▼ to 

change the highlighted option to 

Software Upgrade, and then 

press ENTER to call up Software 

Upgrade display as shown.

If you choose to reset your DVR, highlight the Factory Default tab. You will be prompted to either confirm or cancel 
resetting to factory defaults. Press ESC to cancel or Enter to fully restore your DVR to the factory settings.

Please note that a backup device must be connected to complete the software upgrade. 

The operations are as below:

•

▲▼◄►- Press these buttons to select the items.

•  ESC (MENU/ESC) - Press this button to escape from this screen, and return to Menu display.

Following is a brief description for each item and its specific operations:

•  Backup Device – press ENTER to call up Backup Device dialog (if there is a backup device connected).

•  Disk Storage – to select the disk storage to upgrade. Press +/- buttons to select the available storage.

•  Upgrade File – press ENTER to start the upgrade process when the highlighted file is a correct upgrade file. A   

confirmation dialog will be shown on the screen, press ENTER to confirm to upgrade the system software.

NOTE :  After the software is upgraded, the system will restart immediately. The split window display will be 

shown after restart, this may take a few minutes to complete.

In Menu display, press 

▲▼ to change 

the highlighted option to Shutdown, 

and then press ENTER to shutdown the 

system. A confirmation dialog box will 

be shown on the screen, press ENTER to 

confirm the shutdown. The system will 

save all the files and all the settings, and 

then display a power-off message in the 

rolling screen message area. The user 

may power off the system safely when 

the power-off message is shown.