Cisco Systems RV130W Manual De Usuario
Configuring Wireless Networks
Configuring Basic Wireless Settings
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
64
4
STEP 4
Click Save.
Configuring the Security Mode
You can configure one of the following security modes for wireless networks:
Configuring WEP
The WEP security mode offers weak security with a basic encryption method that
is not as secure as WPA. WEP may be required if your network devices do not
support WPA.
is not as secure as WPA. WEP may be required if your network devices do not
support WPA.
NOTE
If you do not have to use WEP, we recommend that you use WPA2. If you are using
the Wireless-N only mode, you must use WPA2.
the Wireless-N only mode, you must use WPA2.
Enable SSID
Click On to enable the network.
SSID Name
Enter the name of the network.
SSID Broadcast
Check this box to enable SSID broadcast. If
SSID broadcast is enabled, the wireless router
advertises its availability to wireless-equipped
devices in the range of the router.
SSID broadcast is enabled, the wireless router
advertises its availability to wireless-equipped
devices in the range of the router.
Security Mode
See
MAC Filter
See
.
VLAN
Choose the VLAN associated with the network.
Wireless Isolation with SSID
Check this box to enable wireless isolation
within the SSID.
within the SSID.
WMM (Wi-Fi Multimedia)
Check this box to enable WMM.
Max Associated Clients
The maximum number of clients that can
connect to the selected wireless network. Enter
a number between 1 and 64.
connect to the selected wireless network. Enter
a number between 1 and 64.
WPS
Check this box to map the device WPS button
on the front panel to this network.
on the front panel to this network.
Portal Profile
See