Cisco Systems ASR 1000 Series Manual De Usuario
C H A P T E R
8-1
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
8
Replacing Cisco ASR 1000 Series Routers
Field-Replaceable Units
Field-Replaceable Units
This chapter provides information on removing and replacing field-replaceable units (FRUs). The
following information is in this chapter:
following information is in this chapter:
•
•
•
•
•
•
•
•
•
•
•
Removing and Replacing the Cisco ASR 1000 Series RP1
The following sections describe the procedures for removing and replacing a Cisco ASR 1000
Series RP1 route processor in your Cisco ASR 1006 Router and Cisco ASR 1004 Router (The Cisco
ASR1000-RP1 in the Cisco ASR 1002 Router is not a field-replaceable unit because it is embedded into
the chassis).
Series RP1 route processor in your Cisco ASR 1006 Router and Cisco ASR 1004 Router (The Cisco
ASR1000-RP1 in the Cisco ASR 1002 Router is not a field-replaceable unit because it is embedded into
the chassis).
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Statement 1030
Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to any card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94