Cisco Systems OL-20932-02 Manual De Usuario
1-7
Cisco Physical Access Gateway User Guide
OL-20932-02
Chapter 1 Overview
Optional Expansion Modules
CAN Bus Connections for Optional Modules
The optional modules are connected to a Cisco Physical Access Gateway using a CAN bus connection,
as shown in
as shown in
Figure 1-5
CAN Bus Wiring
The CAN bus must adhere to the following rules:
•
The maximum length for the CAN bus is 1320 feet (400 Metres).
•
The last device in a CAN bus must be terminated by setting the CAN terminator switch to ON.
–
The CAN terminator switch in included on the Reader, Input and Output modules only (the
Gateway is always the first device in the CAN bus).
Gateway is always the first device in the CAN bus).
–
Set the terminator switch to OFF for all other modules in the CAN bus.
–
For the location of the CAN terminator on each device, see the physical port description for that
device.
device.
•
The Gateway and Reader modules are connected using the CAN1 interface. The CAN2 interface is
not supported in this release.
not supported in this release.
Related Documentation
See the following chapters for instructions to install the modules and related equipment:
•
•
•
•
271589
Gateway Module
Reader Module
Input Module
Output Module
CAN+
CAN-
Sheild