Schneider Electric PM5100 Manual De Usuario
PowerLogic™ PM5100 series user guide
Chapter 3—Hardware Reference
© 2014 Schneider Electric All Rights Reserved
17
1. Turn off all power supplying this device before working on it.
2. Always use a properly rated voltage sensing device to confirm that all power is off.
Dimension
Figure 3–1: Dimension
Meter mounting
This section describes how to mount the meter.
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
• Apply appropriate personal protective equipment (PPE) and follow safe electrical
work practices. See NFPA 70E in the USA or applicable local standards.
• Turn off all power supplying this device before working on it.
• Always use a properly rated voltage sensing device to confirm that all power is off.
• Do not exceed the device’s ratings for maximum limits.
• Always use grounded external CTs for current inputs.
• Always use a properly rated voltage sensing device to confirm that all power is off.
• Do not exceed the device’s ratings for maximum limits.
• Always use grounded external CTs for current inputs.
Failure to follow these instructions will result in death or serious injury.
DANGER
90.00°
90.00°
96.00
mm
96.00
mm
78.5
mm
12.8
mm
107.4
mm
90.6
mm
72.00
mm