Schneider Electric PM5100 Manual De Usuario

PowerLogic™ PM5100 series user guide 

Chapter 3—Hardware Reference

© 2014 Schneider Electric All Rights Reserved

The meter is designed to be mounted inside a 1/4-DIN panel cutout.

1. Inspect the gasket (installed around the perimeter of the front display) and make sure 

it is secured properly and not damaged.

2. Insert the meter through the mounting hole.

3. Line up the tabs of the retainer clips with the slots on either side of the meter. While 

holding the retainers at a slight angle, push the retainers in and forward to position 
them in place. In situations where the spacing between meters is tight, use a flat-head 
screwdriver with a long, narrow shaft to help secure the clips.

4. Push the middle of the clip assembly to lock the retainer in place and secure the 

meter.

92.0 mm

+0.8

-

0.0

92.0

mm

+0.8

-

0.0