3com 7000 Manual Suplementario
222
C
HAPTER
7: C
ONFIGURING
V
IRTUAL
C
HANNELS
Enable VP Tunneling
Mode
Enables the VP tunneling mode of the CoreBuilder 7000 family ATM
switch. The mode can be enabled or disabled. VP tunnels can only be
configured if the VP tunneling mode is enabled. For more information,
see “VP Tunneling” on page 5-101.
switch. The mode can be enabled or disabled. VP tunnels can only be
configured if the VP tunneling mode is enabled. For more information,
see “VP Tunneling” on page 5-101.
VP Tunneling mode will be enabled only after the next reboot.
Command Actions
Command Result
Example
Enter:
1 1 9 1 2
The following message is displayed:
VP TUNNELING mode will be enabled for the next reboot.
Enter the menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(9) VPT: VP Tunneling Setup
(1) MOD: VP Tunneling Mode Setup
(2) EVP: Enable VP Tunneling Mode
Direct access sequence:
1 1 9 1 2
System action taken:
The VP Tunneling Mode of the CoreBuilder 7000
family ATM switch is enabled. The change will take
place after the next reboot.
family ATM switch is enabled. The change will take
place after the next reboot.
System message display:
VP TUNNELING mode will be enabled for
the next reboot.