Netgear WAC730- ProSAFE® Business 3 x 3 Dual Band Wireless-AC Access Point Manual De Usuario
Initial Setup
18
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
4.
Next to Cloud Enabled, select the No radio button.
5.
Click the Apply button.
The access point restarts with factory default settings but retains its IP configuration and
management VLAN.
management VLAN.
The access point is now ready for standalone operation with a full web management
interface.
interface.
Configure Basic General System Settings
To configure basic system settings:
1.
Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
access point or to the access point directly through an Ethernet cable.
2.
In the address bar, enter the IP address of the access point.
A login window opens.
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Select Configuration > System > Basic > General.