Netgear WAC730- ProSAFE® Business 3 x 3 Dual Band Wireless-AC Access Point Manual De Usuario
Initial Setup
19
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
5.
Configure the settings as described in the following table.
Note:
For information about enabling the access point for the cloud and using
the access point as a cloud-managed device, see the Business Central
Wireless Manager Application Quick Start Guide and Business Central
Wireless Manager Application User Manual, both of which you can
download from
the access point as a cloud-managed device, see the Business Central
Wireless Manager Application Quick Start Guide and Business Central
Wireless Manager Application User Manual, both of which you can
download from
.
6.
Click the Apply button.
Your settings are saved.
Configure Time Settings
To configure time settings:
1.
Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
access point or to the access point directly through an Ethernet cable.
2.
In the address bar, enter the IP address of the access point.
Setting
Description
Access Point Name
This unique name is the access point NetBIOS name. The name is printed on the
rear label of the access point. The default is netgearxxxxxx, in which xxxxxx
represents the last 6 digits of the access point MAC address. You can replace the
default name with a unique name up to 15 characters long. The access point name
can be retrieved through SNMP.
rear label of the access point. The default is netgearxxxxxx, in which xxxxxx
represents the last 6 digits of the access point MAC address. You can replace the
default name with a unique name up to 15 characters long. The access point name
can be retrieved through SNMP.
Country / Region
From the Country / Region menu, select the country where the access point is
installed.
installed.
Note:
It might not be legal to operate this access point in a region other than one of
those identified in this field.