Cisco Cisco Aironet 1552WU Outdoor Access Point Guía De Instalación
27
Figure 14
Access Point Point-to-Point Bridging Example
255495
(5 GHz)
Point-to-Multipoint Bridging
The access points can be used as a RAP to connect multiple remote MAPs with their associated wired
networks. By default this capability is turned-off for all access points. To support Ethernet bridging,
you must enable bridging on the controller for each access point. Wireless client access can be provided
over the bridging link; however, if bridging between tall buildings, the 2.4-GHz wireless coverage area
may be limited and possibly not suitable for direct wireless client access.
networks. By default this capability is turned-off for all access points. To support Ethernet bridging,
you must enable bridging on the controller for each access point. Wireless client access can be provided
over the bridging link; however, if bridging between tall buildings, the 2.4-GHz wireless coverage area
may be limited and possibly not suitable for direct wireless client access.
illustrates an example of access point-to-multipoint bridging.
Figure 15
Access Point Point-to-Multipoint Bridging Example
255494
(5 GHz)
(5 GHz)