Cisco Cisco Aironet 1310 Access Point Bridge Guía De Instalación

The access point supports a wall or ceiling mounting bracket that can be used only with the external 
antenna access point unit (see 

). The bracket can be used indoors only.

Installing the access point on a wall or ceiling includes the following subtasks:

Mounting the unit

Routing the cables (normal)

Activating the link

To mount the external antenna access point unit using the wall or ceiling mounting bracket, follow these 
steps:

Choose a mounting location for the access point. For more information, see 

Find a solid mounting position for the mounting bracket, such as a stud or main building member on a 
building wall or ceiling. It may be necessary to utilize a stud finder to find a wooden structural member. 

Place the mounting bracket on the access point as shown in 

 and snap into position. The bracket 

has an opening that corresponds to the shape of the access point with a flat cut-out segment that 
corresponds to the access point connector area.

The bracket support feet must be positioned towards the front of the access point.

117142