Cisco Cisco Aironet 1310 Access Point Bridge Guía De Instalación

Mount the access point using the following user-provided hardware:

Wooden structure—three 1/4 x 1 inch (minimum) lag bolts

Hollow walls—three 1/4-20 x 2 3/4 molly anchors

Concrete structure—three 1/4 x 1 inch (minimum) bolts with concrete anchors

Examine the structure to ensure that the mounting location is not deteriorating or weak. You are 
responsible for ensuring that the mounting location can adequately support the access point.

Tighten the bolts to secure the access point mounting bracket to the wall or ceiling. 

When using the wall or ceiling mounting bracket, you can mount the power injector directly on the 
access point mounting lugs (see 

) using the hardware included with the bracket.

When mounted together, the access point and power injector must be mounted in a sheltered indoor 
environment. 

The following hardware used to mount the power injector on the access point is supplied with the wall 
or ceiling mounting bracket kit:

Four hex head bolts with serrated flange (M6x1x10 mm) 

Four washers

117145