Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP) Guía De Instalación
9
Installing Cisco ONS 15454 SONET/SDH XC-VXC-10G Cards
78-17123-01
Install the XC-VXC-10G Cards
Figure 4
Installing a Card in an ONS 15454
Note
You must install the TCC2/TCC2P card first and let it initialize before installing the XC-VXC-10G card.
This is not the procedure to use when upgrading from XC10G (for SONET) or XC-VXL-10G (for SDH)
to XC-VXC-10G cards. If you are performing an XC10G or XC-VXL-10G to a XC-VXC-10G upgrade,
see the
to XC-VXC-10G cards. If you are performing an XC10G or XC-VXL-10G to a XC-VXC-10G upgrade,
see the
.
Step 1
Verify that power is applied to the shelf assembly.
Step 2
Open the card ejectors.
Step 3
Slide the card along the guide rails into the correct slot (Slot 8 or 10 for the XC-VXC-10G and Slot 7 or
11 for the TCC2/TCC2P).
11 for the TCC2/TCC2P).
Step 4
Close the ejectors.
Step 5
Verify the LED activity as described in
.
FAN
FAIL
CRIT
MAJ
MIN
39391
Guide rail
Ejector