HP proliant dl580 Manual De Usuario

Removal and replacement procedures  20 

Power down the server (on page 

Use the T-15 Torx screwdriver to eject the drive, and pull the drive out of the server. 

  NOTE:  The T-15 Torx screwdriver is shipped with the server and can be located on the rear panel ("

 

To replace the component, reverse the removal procedure. 

 

Removing the processor module 

  NOTE:  Refer the section "Processor module LEDs (on page 

)" for information on the current processor 

and PPM status. 

Power down the server (on page 

Remove the shipping bracket, if applicable. 

  NOTE:  The shipping bracket is located near the processor module lever, and is marked with an orange tab 

for easy identification.