HP proliant dl580 Manual De Usuario

Removal and replacement procedures  18 

Remove all power supplies ("

Loosen the thumbscrews, and lift the system cage from the server. 

  NOTE:  The T-15 Torx screwdriver can be used to loosen the thumbscrews. The T-15 Torx screwdriver is 

shipped with the server and can be located on the rear panel ("

 

 

Removing the front bezel 

Power down the server (on page 

Extend the server from the rack ("

Remove the access panel ("

Using the T-15 Torx screwdriver, remove the three screws on each side of the front bezel. 

  NOTE:  The T-15 Torx screwdriver is shipped with the server and can be located on the rear panel ("

 

Release the two levers on the lower outside corners of the rack.