Digidesign 2 Manual De Usuario
Getting Started with Digi 002
88
Master Fader View
Master Fader View displays 5 channels in the
Digi 002 channel strip area. The Master Faders
and Effects Returns appear, with the Master Fad-
ers on the right.
Digi 002 channel strip area. The Master Faders
and Effects Returns appear, with the Master Fad-
ers on the right.
To put Digi 002 into Master Fader View:
■
In Stand-alone Mode, press the Master Fader
switch to the left of the Navigation and Trans-
port controls.
port controls.
Master Faders
The left and right Master Faders
control the output level to Main Outputs 1–2 on
the back panel of Digi 002.
the back panel of Digi 002.
Reverb Returns
These are the left and right re-
turns for Send B, the internal Reverb effect.The
amount of reverb effect in the mix output can
be controlled with these faders.
amount of reverb effect in the mix output can
be controlled with these faders.
Delay Return
This is a mono return for Send A,
the internal Delay effect. The fader controls the
amount of delay effect, and the rotary encoder
controls its pan position in the mix output.
amount of delay effect, and the rotary encoder
controls its pan position in the mix output.
Reverb and Delay Mute
You can mute the Reverb and Delay effect re-
turns by pressing the Mute switch on the respec-
tive channel while in Master Fader View. This al-
lows you to audition the source tracks with the
effects temporarily removed.
turns by pressing the Mute switch on the respec-
tive channel while in Master Fader View. This al-
lows you to audition the source tracks with the
effects temporarily removed.
Reverb and Delay Solo Safe
In Stand-alone mode, the Reverb and Delay re-
turns have a Solo Safe feature. If any input chan-
nel (1–8) has a send assigned to the Reverb or
Delay and the solo switch is pressed on an input
channel, the Reverb and Delay effect returns are
not muted, and the effect can still be heard. You
can disable the Solo Safe feature by changing the
Solo preference setting.
turns have a Solo Safe feature. If any input chan-
nel (1–8) has a send assigned to the Reverb or
Delay and the solo switch is pressed on an input
channel, the Reverb and Delay effect returns are
not muted, and the effect can still be heard. You
can disable the Solo Safe feature by changing the
Solo preference setting.
To change the Solo Safe preference:
1
In Stand-alone mode, press F1 (Utility).
2
Press the illuminated Channel Select switch
under Pref.
3
Press the illuminated Channel Select switch
under Solo.
4
Press the illuminated Channel Select switch
repeatedly to toggle the Solo Safe feature On or
Off.
Off.
5
Press the Escape switch to exit Solo Safe pref-
erences.
6
Press the far right-hand Channel Select switch
to save the preference settings.
7
Press the Escape switch twice to exit Utility
mode.