Digidesign 2 Manual De Usuario

Channel Strip Controls

In Console View, each of the 8 channel strips on 
Digi 002 controls its corresponding input. 

Channel Name

The name of each channel appears in the Chan-
nel Scribble strips If you move a fader or rotary 
encoder, the scribble strip temporarily shows 
the volume level or pan position. You can re-
name each of the input channels. (See “Naming 
Channels” on page 90.)

Encoder/Meter LED Ring

Encoder Mode 

In normal mode (when the “L” 

and “R” Encoder/Meter indicators are lit), the 
LED rings above the rotary encoders indicate 
one of the following:

◆

In Pan View (or Home View), the LED rings in-

dicate channel pan position. 

◆

In Send View, the LED rings indicate the level 

for the selected send (A–D) for each channel. 

◆

In Master Fader View, the Delay Return LED 

ring shows pan position. (No other Rotary En-
coders are active in this view.)

◆

In Channel View, the LED rings display EQ, 

Compressor, or Pan/Send information. 

Meter Mode 

When you press the Encoder/Meter 

mode switch to the right of the Channel View 
area so the Meter LED is lit, the LED rings act as 
meters in the following ways:

◆

In Pan View and Send View, the LED rings act 

as post-fader meters for each input channel. 

◆

In Master Fader View, the LED rings act as 

post-fader meters for the effect return and Mas-
ter Fader channels. 

◆

When viewing EQ controls in the Channel 

View area, the LED rings act as post-fader meters 
for each input channel. 

◆

When viewing compressor controls in the 

Channel View area, the LED rings act as input, 
output, and gain reduction meters for the dis-
played compressor. 

Channel Name

Encoder/Meter LED ring

Rotary Encoder

Channel Solo and

Channel Volume Fader

Mute switches

Channel Select switch