BMI Technologies Inc. VUI00 Manual De Usuario
DRAFT G FORCE PLUS & G FORCE PLUS RF Instruction Manual
Nov 2005
32
Doc #RF1 Rev.2
1. Program the Vehicle settings for the selected Vehicle to the Data Logger.
2. Record the memory slot for the selected Vehicle.
3. Repeat steps 1 and 2 for up to 8 (eight) more Vehicles.
4. Place the selected Vehicle Monitor into Maintenance Lockout.
5. Clear the Vehicle Monitor Event memory (see
Collect Data from a Vehicle
).
6. Reprogram the Vehicle settings for the selected Vehicle to the Vehicle Monitor.
7. Remove the selected Vehicle Monitor from Maintenance Lockout.
8. Repeat steps 5 to 8 for the remaining Vehicles.
7. Remove the selected Vehicle Monitor from Maintenance Lockout.
8. Repeat steps 5 to 8 for the remaining Vehicles.
NOTE!
In order to program a Vehicle Monitor, the Event memory of a Vehicle
Monitor must be empty (see
Collect Data from a Vehicle
).
In a G FORCE PLUS RF system, Events are deleted from memory as
they are communicated via the RF communications link.