Geonautics International Pte Ltd 30-0710 Manual De Usuario

TAG-T3 Wombat – User Guide, 1.0.7  

Commands

 

 
Set the trigger levels for voltage rises and voltage drops.  The duration 
of the trigger is set by the duration time of the Motion (Configuration) 
command. See page 22. 
 
 
$GO0,,VLT[,<low>][,<high>] 
 
$GOA,<Unit_Id>,VLT,<low>,<high> 
 

low 

Lower voltage trigger level expressed as volts*10 

high 

Upper voltage trigger level expressed as volts*10 

Table 7, Voltage Command 

 
Default:  

$GO0,,VLT,0,135 

 
Example: 

$GO0,,VLT,20,120 

 
Returns:  

$GOA,<Unit_Id>,VLT,20,120 

 
 
 
A voltage setting of 135 is interpreted as 13.5 volts. 
 
When setting the high limit to sense the alternator induced voltage 
rise, use the Parameter, page 42, or Debug (Last), page 44, command 
to establish the voltage when the engine is running and then set the 
high value to a voltage slightly under that voltage (0.3 volts lower is 
normally sufficient). 
 
 

© Geonautics 

23 

Law Enforcement ONLY