Arescom Inc. AG2000S Manual De Usuario
Panel Information
6
June, 2002
AG2000Series Software User’s Guide
2.1.2 AresGate 2000 - Back Panel
Figure 2.2
AresGate 2000 Back Panel Ports and Switch
LAN
The LAN port connects the AG2000 to a PC, hub or switch on your wired LAN network.
POWER
The POWER port is where you connect the AC power adapter.
ON/OFF Switch
Utilize this ON/OFF switch to turn the AG2000 on or off.
WAN
The 10BaseT WAN port is where you connect your existing Cable/DSL modem.
Antenna Connector
The included external antenna needs to be securely attached to the antenna connector located on the far
right side of the back panel.
right side of the back panel.
2.1.3 AresGate 2000S - Front Panel
Figure 2.3
AresGate 2000S Front Panel LEDs
PWR (Power)
The PWR LED is ON when power is supplied to the AG2000S.
DIAG (Diagnostic)
The DIAG LED indicates the AG2000S is in a self-diagnostic mode during boot-up. Once it boots up
successfully, the LED will automatically turn off. If there is a software malfunction or a problem with
the unit, the LED will remain on.
successfully, the LED will automatically turn off. If there is a software malfunction or a problem with
the unit, the LED will remain on.
WAN
The WAN LED displays the 10BaseT WAN port Ethernet connection status between the AG2000S and
a broadband device (e.g. Cable modem or DSL modem). The WAN LED is solid on when a valid
Ethernet link is established. The LED flashes when there is data activity on this port.
a broadband device (e.g. Cable modem or DSL modem). The WAN LED is solid on when a valid
Ethernet link is established. The LED flashes when there is data activity on this port.