Gantner Pigeon Systems GmbH EXPRESS Manual De Usuario

EXPRESS – Club System 
SYSTEM 

DK_EXPRESS_Vereinsanlage-e_0123.doc 

Gantner Electronic GmbH 

 

The clock is an important part of the club system. The internal clock of the CAN is standard 
equipment. If desired an external clock can be delivered (a radio clock, a Masterclock or a 
GPS clock). 

 

If an external clock is used the CAN clock is automatically turned off. 

 

 

If no CAN (external clock) is used the pigeons have to be registered and basketed with the 
internal antenna of the EXPRESS. 

 

Make sure that the EXPRESS is not installed above a compact metal surface as this can 
influence the correct performance of the internal antenna. Therefore a minimum distance of 
6 centimeters (2.4 inches) should be kept between the EXPRESS and the metal surface. No 
particular distance however is required between small metal parts like screws, nails or metal 
bars and the EXPRESS. 

 

Advice:  The distance between a PC screen and the EXPRESS has to be at least 50 
centimeters (19.7 inches). 

 

The ATIS Power Supply Unit is connected with the mains (110/230 volt) and supplies the 
CPN, the CNN, the EXPRESS and the club antenna (CAN) with the necessary low voltage 
(direct current of about 12 volt). 

 

Advice: Only use a power supply unit recommended by your ATIS supplying agent! 

 

 

This badge enables the user to authorize the registration of the pigeons. The person in 
charge of the registration is also  in possession of the red badge. 

 

 

This badge enables the user to basket the pigeons at a race. It is in possession of the race 
secretary who is also responsible for the correct operation. 

 

 

This badge enables the printing of the evaluation list. It is left in the custody of the race 
secretary who is also in charge of the correct operation. 

 

 

The EXPRESS cannot be used with every printer. The following printers guarantee for a 
correct performance: