Given Imaging Limited GIVENRECORDER Manual De Usuario
Introduction
Chapter 1
7
Warning
•
The cradle is for indoor use only.
•
Never charge non-rechargeable batteries.
•
All cells containing mercury, cadmium, or lead as electrochemical substances are
subject to special waste disposal requirements.
subject to special waste disposal requirements.
•
This charger is a class A product. In a domestic environment, this charger may
cause radio interference.
cause radio interference.
DataRecorder 3
The DataRecorder 3 consists of a receiver, a transmitter, and a memory device for storing the
data transmitted by the PillCam capsule.
data transmitted by the PillCam capsule.
The standard DataRecorder 3 Kit includes the following items:
•
DataRecorder 3
•
Pouch + shoulder strap
•
DataRecorder 3 cradle
•
External power supply
SensorArrays are not part of the standard kit, and are supplied separately.
The battery of the DataRecorder 3 is charged while the DataRecorder is in its cradle.
The DataRecorder is ready for operation when its battery is charged, removed from the cradle,
and the SensorArray is connected. When ON, the DataRecorder initiates pairing procedure (see
DataRecorder-Capsule Pairing in chapter 4 of the Procedure Manual) as soon as a signal is
received from a capsule. When the capsule LED on the DataRecorder blinks in blue, the
DataRecorder is receiving data from a paired capsule.
and the SensorArray is connected. When ON, the DataRecorder initiates pairing procedure (see
DataRecorder-Capsule Pairing in chapter 4 of the Procedure Manual) as soon as a signal is
received from a capsule. When the capsule LED on the DataRecorder blinks in blue, the
DataRecorder is receiving data from a paired capsule.
ON/OFF Button
Acknowledge Button
Capsule and Message
LEDs
Line for status icons
Procedure info area
Navigation Buttons
Cradle
Card Reader
Message area
Capsule LED
Message LED