Digital Monitoring Products Inc PC0179 Manual De Usuario
iComSL
Series Universal Communicator Installation and Programming Guide
Digital Monitoring Products
3
Mounting the iComSL Series Communicator
2.1
Selecting a Location
Install the communicator away from metal objects.
DO NOT MOUNT THE iCOMSL SERIES COMMUNICATOR INSIDE
OR ON A CONTROL PANEL METAL ENCLOSURE (See Figure 5).
Control Panel
Metal Enclosure
Figure 5: Suggested Mounting Locations
Figure 6: Mounting Screw Locations
Mounting Screw Locations
R
B
J8
J1
RESET
LOAD
S1
S2
S3 J9
Figure 7: Wire Routing Options
R
B
J8
J1
RESET
LOAD
S1
S2
S3 J9
R
B
J8
J1
RESET
LOAD
S1
S2
S3 J9
Mounting the communicator on or near metal surfaces impairs Z-Wave wireless performance. The enclosure for
the communicator should be mounted using the provided #6 screws in the four mounting holes (See Figure 6).
Mount the enclosure in a secure, dry place to protect the communicator from damage due to tampering or the
elements. It is not necessary to remove the PCB when installing the enclosure.
When installing component wires, care must be taken to route all wires in such a manner that they will not
interfere with the Tamper switch (See Figure 7).
InstallatIon