Mindray DS USA Inc. WT0707-00000 Manual De Usuario
Transfer Tab
Patient Setup Functions
5 - 26
0070-10-0690-01
Panorama™ Operating Instructions
3. Select the Transfer tab. The Transfer tab (shown in FIGURE 5-14) is displayed.
4. Select the Accept/Reject button on the Transfer tab. The Transferred In Patient
view (shown in FIGURE 5-16) is displayed.
FIGURE 5-16 Transferred In Patient View
• Select the Accept button. The message All of the patient's data will be deleted in
the destination tile. Do you still want to continue with the transfer? is
displayed with the following two choices:
displayed with the following two choices:
• The Yes button begins the transfer and returns to the Transfer tab. While the transfer
is in progress, the following conditions exist:
If the destination tile is in Standby mode when the transfer is complete, the digital data
displays but the waveform does not display. Upon returning to normal monitoring mode,
the waveform is displayed.
displays but the waveform does not display. Upon returning to normal monitoring mode,
the waveform is displayed.
If the destination tile is in a Communications Lost state when the transfer is complete,
the tile is blank and all buttons on the Transfer tab are unavailable. The tile remains
blank until communication has been re-established.
the tile is blank and all buttons on the Transfer tab are unavailable. The tile remains
blank until communication has been re-established.
If the destination tile is in a Waiting for Patient state when the transfer is complete, the
tile will display the Waiting for Patient message until the destination device is activated.
tile will display the Waiting for Patient message until the destination device is activated.
When the transfer is complete, the message Transfer In Complete is displayed on the
system status line of the Destination Panorama and the message Transfer Out
Complete is displayed on the system status line of the Source Panorama.
system status line of the Destination Panorama and the message Transfer Out
Complete is displayed on the system status line of the Source Panorama.
When the transfer is complete, the source tile is blank and the destination tile remains
blank until the patient is connected to the monitoring device.
blank until the patient is connected to the monitoring device.
NOTE:
When the transfer is complete, a Central Transfer event and
an Admit event are recorded in the event database.
an Admit event are recorded in the event database.
• The No button returns to the Transfer tab without terminating the transfer.
In the Transfer tab of the Destination Panorama, the message Incoming
Transfer In progress is displayed next to the Accept/Reject Patient button,
which has been disabled. A progress bar displays below the Accept/Reject
Patient button.
Transfer In progress is displayed next to the Accept/Reject Patient button,
which has been disabled. A progress bar displays below the Accept/Reject
Patient button.
In the Transfer tab of the Source Panorama, a progress bar displays below the
Central To Central Without Device button.
Central To Central Without Device button.