Mindray DS USA Inc. WT0707-00000 Manual De Usuario

2. Ensure that the device name for the Source Panorama is properly entered into the 

Equipment List at the Destination Panorama, as described in the ‘‘Equipment Setup Tab’’ 
on page 9-33.

3. Ensure that the device name for the Destination Panorama is properly entered into the 

Equipment List at the Source Panorama, as described in the ‘‘Equipment Setup Tab’’ on 
page 9-33.

4. Select the patient tile to be transferred. Choose a patient tile by selecting its digital data 

or waveform area.

5. Select the Central To Central Without Device button. The Select Destination 

Panorama list box (shown in FIGURE 5-15) is displayed.

FIGURE 5-15 Select Destination Panorama List Box

6. Select the Destination Panorama device from the Select Destination Panorama list 

box.

• Select the Done button. The message Are you sure you want to transfer the 

selected patient? is displayed with the following two choices:

• Select the Cancel button to terminate the transfer and return to the Transfer tab.

If the transfer process is initiated, it will continue as described in following section, 
“Destination Panorama”. As the transfer process continues, the procedure will refer to 
messages and a progress bar that will display at the Source Panorama.

5.2.3.2

Destination Panorama

When a Central To Central Transfer Without Device has been requested from 
another Panorama Central Station, the message Transfer In Request from [the Source 
Panorama name]. Accept/Reject in Transfer Dialog. is displayed in the system 
status line of the Destination Panorama.

1. At the Destination Panorama, select a tile that has a monitoring device attached.

2. From the menu bar, select the Patient Setup menu button. The tabs associated with 

Patient Setup are displayed.

• Select the Yes button to initiate the first part of the transfer process and 

return to the Transfer tab. In the Transfer tab, the message Central 
Transfer in progress is displayed next to the Central To Central 
Without Device button, which has been disabled.

• Select the No button to terminate the transfer and return to the Transfer 

tab.