Mindray DS USA Inc. WT0707-00000 Manual De Usuario
Unit Priorities Tab
System Setup Functions
9 - 48
0070-10-0690-01
Panorama™ Operating Instructions
3. Choose the Select button. The selected parameter is assigned its new unit priority
position and will be shown in the box on the right of the selected unit priority.
4. Repeat steps 2-3 until the parameters are in the desired order.
5. Select the Done button. All priority changes in the Unit Priorities tab have now been
confirmed. The changes that were made will only be applied to newly admitted patients
and will not affect patients currently being monitored.
and will not affect patients currently being monitored.
9.13.2.1
Setting the Waveform System Defaults
Select the Wave Defaults sidebar button to select the system default patient tile waveforms.
1. Select the Wave Defaults sidebar button in the Unit Priorities tab. The Wave
Defaults dialog box (shown in FIGURE 9-37) is displayed.
FIGURE 9-37 Wave Defaults Dialog Box
1. Select the Waveform 1 button until the desired ECG waveform is displayed.
The settings available for the ECG waveform include ECG I through V6. The factory
default setting is ECG II.
default setting is ECG II.
2. Select the Waveform 2 button until the desired ECG waveform is displayed.
The settings available for the ECG waveform include ECG I through V6, IBP1-IBP4, Resp,
Pleth, CO2, O2, Agent, and OFF. The factory default setting is OFF.
Pleth, CO2, O2, Agent, and OFF. The factory default setting is OFF.
3. Accept or reject the selections made in the dialog box.
• Select the Done button to accept the selections.
• Select the Cancel button to discard the selections, close the dialog box and return to
the Unit Priorities tab.
9.13.3
Sidebar Buttons
The following sidebar buttons are used to expand the functionality of this tab.
Wave Defaults
This sidebar button was previously described on page 9-48.
Normal Screen
Select the Normal Screen sidebar button to return the display to the full screen mode, and
close all tabs, message boxes, and dialog boxes.
close all tabs, message boxes, and dialog boxes.