Atmel SAM4S-XPLD Atmel ATSAM4S-XPLD ATSAM4S-XPLD Hoja De Datos

 862

SAM4S [DATASHEET]

11100E–ATARM–24-Jul-13

The dead-time generator uses the comparator output OCx to provide the two complementary outputs DTOHx and
DTOLx, which allows the PWM macrocell to drive external power control switches safely. When the dead-time generator
is enabled by setting the bit DTE to 1 or 0 in the 

 (PWM_CMRx), dead-times (also called

dead-bands or non-overlapping times) are inserted between the edges of the two complementary outputs DTOHx and
DTOLx. Note that enabling or disabling the dead-time generator is allowed only if the channel is disabled.

The dead-time is adjustable by the 

 (PWM_DTx). Both outputs of the dead-time

generator can be adjusted separately by DTH and DTL. The dead-time values can be updated synchronously to the
PWM period by using the 

 (PWM_DTUPDx).

The dead-time is based on a specific counter which uses the same selected clock that feeds the channel counter of the
comparator. Depending on the edge and the configuration of the dead-time, DTOHx and DTOLx are delayed until the
counter has reached the value defined by DTH or DTL. An inverted configuration bit (DTHI and DTLI bit in the
PWM_CMRx register) is provided for each output to invert the dead-time outputs. The following figure shows the
waveform of the dead-time generator.

PWMH0

DOWNx

GCEN0 = 1

PWMH1

PWML0

PWML1