Geo PCK-EN-005 Hoja De Datos

There are two ways to reset the display:

• clear the memory

• reset the wireless network

For both options, first the display must be unplugged. Then press and hold the buttons  „“ and „“ when recycling
the power and thus starting the display. You are now in the display „RESET“ mode.



All entries are sequential. Therefore, you will reach the next step only after you confirm (Y) the previous
entry!

The display queries first the general settings (tariffs, time, etc ...) to be reset. The buttons come with the following
function now:

Button „“:

Confirmation to erase the settings

Button „“:

Keep the data, leave the „RESET“ mode

With this entry you can unpair all connected devices.

Button „“:

Confirmation to unpair all connections

Button „“:

Keep connections paired, leave the „RESET“ mode

When all data has been erased, the display queries to be a master („MST“) or a slave („SLV“). Slave is referring to
an additional display connected to the main display (master) to mirror its screen.

Button „“:

Master (MST)

Button „“:

Slave (SLV)

In very rare cases the products cannot find each other, because two nearby „ENSEMBLE“ devices are
using the same network ID. In this case, the network needs to be reset down to "MST / SLV" request (with
„MST“ as last choice) and rebuilt entirely. All products must be reconnected („PAIRING“ mode).