Schneider Electric PM5300 Manual De Usuario

PowerLogic™  PM5300 series user guide 

Chapter 4—Front panel display and meter setup

© 2014 Schneider Electric All Rights Reserved

41

The Clock setup screens allow you to set the meter’s date and time.

1. Navigate to Maint > Setup.

2. Enter the setup password (default is “0000”), then press OK.

3. Navigate to Clock.

4. Move the cursor to point to the parameter you want to modify, then press Edit.

5. Modify the parameter as required, then press OK.

6. Move the cursor to point to the next parameter you want to modify, press Edit, 

make your changes, then press OK.

7. Press   to exit. Press Yes to save your changes.

•

See “Setting up regional settings” on page 39 for instructions on changing the 
format of the displayed date and time.

The advanced setup screens let you change the meter name, set up a timer for 
monitoring load current, and specify the minimum demand current for total demand 
distortion calculations.

•

Load Timer Setpt: specifies the minimum current at the load before the timer starts.

•

Pk I dmd for TDD: specifies the minimum current demand value to consider for total 
demand distortion calculations.

1. Navigate to Maint > Setup.

2. Enter the setup password (default is “0000”), then press OK.

Date

MM/DD/YY

Set the current date using the format displayed 
on screen, where MM = month, DD = day and 
YY = year.

Time

HH:MM:SS (24 hour format), 

Use the 24-hour format to set the current time 
(GMT or local) in hours (HH), minutes (MM) and 
seconds (SS).

Meter Time

GMT, Local

Select GMT if you set the current time to 
Greenwich Mean Time zone. Otherwise, select 
Local.

GMT Offset (h)

-

Set the GMT Offset between ± 00.0 and ± 12.0 
hrs.

Maint

Reset

Setup

Meter

Comm

Alarm

I/O

HMI

Clock

Basic

Maint

Reset

Setup

Comm

Meter

Advan