Schneider Electric PM5300 Manual De Usuario

PowerLogic™  PM5300 series user guide 

Chapter 4—Front panel display and meter setup

© 2014 Schneider Electric All Rights Reserved

39

7. Press   to exit. Press Yes to save your changes.

You can change the regional settings to localize the meter screens and display data in 
a different language, using local standards and conventions.

In order to display a different language other than those listed in the Language 

setup parameter, you need to download the appropriate language file to the meter 
using the appropriate firmware upgrade tool such as DLF3000. See “Downloading 
Firmware” on page 104.

1. Navigate to Maint > Setup.

2. Enter the setup password (default is “0000”), then press OK.

3. Navigate to HMI > Region.

4. Move the cursor to point to the parameter you want to modify, then click Edit.

5. Modify the parameter as required, then press OK.

6. Move the cursor to point to the next parameter you want to modify, press Edit, 

make your changes, then press OK.

7. Press   to exit. Press Yes to save your changes.

This can only be configured through the front panel. The factory-default setting for all 
passwords is “0000”. Changing the default password for screens that are password-

Contrast

1 - 9

Increase or decrease the value to increase or 
decrease the display contrast.

Backlight Timeout (min)

0 - 60

Set how long (in minutes) before the backlight 
turns off after a period of inactivity. Setting this to 
“0” disables the backlight timeout feature (i.e., 
backlight is always on).

Screen Timeout (min)

0 - 60

Set how long (in minutes) before the screen turns 
off after a period of inactivity. Setting this to “0” 
disables the screen timeout feature (i.e., display is 
always on).

Language

English US, French, Spanish, German, 
Italian, Portuguese, Chinese, Russian

Select the language you want the meter to 
display.

Date Format

MM/DD/YY, YY/MM/DD, DD/MM/YY 

Set how you want the date to be displayed, 
e.g., month/day/year.

Time Format

24Hr, AM/PM

Set how you want the time to be displayed, 
e.g., 17:00:00 or 5:00:00 PM.

HMI Mode

IEC, IEEE

Select the standards convention used to 
display menu names or meter data.

Maint

Reset

Meter

Comm

Alarm

I/O

Clock

Displ

Pass

Region

HMI

Setup