Brother T76 Manuel D’Utilisation

   Advanced Receiving   

Press Activation Voice Code 

 

 at remote cordless phone.

The fax machine rings (pseudo-ring same as current F/T ring) and the display shows “PICK UP 
PHONE”.

Pick up the handset and press 

 or 

––OR––just press 

 at 

the fax machine in order to transfer the voice call to the fax machine.

If nobody answers at the fax machine, pseudo-ringing stops after 30 seconds. In that case, it may still 
be possible to speak with the caller from the cordless phone. Speech between the fax machine and 
the cordless phone (= intercom) is not possible. 

Remote Codes might not work with some telephone systems. The preset Activation Code is 

 

. 

The preset Deactivation Code is 

. The preset Activation Voice Code is 

 

. 

Press 

, 

, 

.

Press 

 or 

 to select ON (or OFF), and press 

 when the screen displays the setting 

you want.

If you want to, enter a new Remote Activation Code, then press 

.

If you want to, enter a new Remote Deactivation Code, then press 

.

If you want to, enter a new Activation Voice Code, then press  

.

Press 

 to exit.

Your FAX supports the Caller ID and BT Call Sign (For U.K. Only) telephone services offered by 
some telephone companies.

Caller ID is a telephone service that allows the subscriber to see a display of the caller’s phone number 
as the telephone rings. It is a fast way to screen your calls. You can respond quickly to calls you missed, 
because Caller IDs are received and stored in your machine’s memory. In addition to the standard 
Caller ID features, you can select a Caller ID and have your machine dial the number for you.

Don’t hang up the call from the cordless phone until the voice call has been 
transferred to the fax machine. You will know when this is because you will no 
longer be able to hear or talk to the caller via the cordless phone. If you do not wait 
until this point before hanging up from the cordless phone, the call will be lost. 

If you are always disconnected when accessing your external TAD remotely, try 
changing the Activation Code from 

 5 1 to # # # and the Deactivation Code from 

 to 1 1 1. You cannot use the same number for the Activation Code and the 

Deactivation Code.