Brother T76 Manuel D’Utilisation

   Chapter 8

All businesses profit from a quicker response to customer calls.

Residential customers can protect themselves from unwanted calls by seeing the callers name or 
number before they answer.

If you have BT Caller ID on your line, then this function should be set to ON to display the caller’s 
phone number on the fax LCD as the telephone rings.

Press 

, 

, 

. The screen displays;

Press 

 or 

 to choose ON, and press 

.

Press 

 to exit.

As your telephone rings, the display shows you the caller’s phone number. If the callers name is 
stored in your machine as a Speed Dial, or One Touch dial, the callers name will be displayed. Once 
you pick up the handset, the caller’s ID disappears. You will see up to the first 16 characters of the 
number on the display.

The machine can store a maximum of the last 30 incoming caller IDs in the memory, along with the 
time and date of reception. The 31st call will cause the oldest ID to be erased.

The Caller ID information stored in the memory can be used for the following.
■ Selecting a Caller ID from the Memory for Call Reply.

You can scroll through the Caller IDs on the display and select one for your machine to dial. 
(See below)

■

To get the Caller ID Service: apply for the Caller ID service at your local 
telephone company, if available.

■

To PABX Users :
Calling line identification signals are not generally delivered to your Brother fax 
machine if it is connected behind a private branch exchange (PBX) system or 
other call routing device.

■

If “# UNAVAILABLE” appears on the display, it means that the call came from 
outside your caller ID service area. *

■

If “# WITHHELD” appears on the display, it means the caller intentionally 
blocked the transmission of his/her ID. *

■

If no caller ID was transmitted to your fax machine, “PICK UP PHONE” will 
remain on the display.

* Depends on network Function.

DISPLAY ID

SELECT { } & SET