3com S7906E Guide De Référence
1-6
Field
Description
Partner ID
System ID of the partner
Select Ports
The number of selected ports
Unselect Ports
The number of unselected ports
Share Type
Load sharing type
display link-aggregation verbose
Syntax
display link-aggregation verbose [ bridge-aggregation [ interface-number ] ]
View
Any view
Default Level
1: Monitor level
Parameters
bridge-aggregation: Displays detailed information about the Layer-2 aggregate groups corresponding
to Layer-2 aggregate interfaces.
interface-number: Aggregate interface number. The value range is 1 to 1,024. Note that the aggregate
interface you specify must already exist.
Description
Use the display link-aggregation verbose command to display detailed information about the
aggregation groups corresponding to the aggregate interfaces.
To display the information of a specific Layer-2 aggregate group, use the display link-aggregation
verbose bridge-aggregation
interface-number or display link-aggregation
verbose
bridge-aggregation interface-number command.
To display the information of all Layer-2 aggregate groups, use the display link-aggregation verbose
bridge-aggregation or display link-aggregation verbose route-aggregation command.
To display the information of all aggregate groups, use the display link-aggregation verbose
command.
Examples
# Display the detailed information of the aggregation group corresponding to Layer-2 aggregate
interface Bridge-aggregation 10.
<Sysname> display link-aggregation verbose bridge-aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,