3com S7906E Guide De Référence

 

2-11 

# Specify the primary authentication/authorization server for RADIUS scheme radius1. 

<Sysname> system-view 

[Sysname] radius scheme radius1 

[Sysname-radius-radius1] primary authentication 10.110.1.1 1812 

undo radius client 

System view 

2: System level 

None 

Use the radius client enable command to enable the listening port of the RADIUS client.  

Use the undo radius client command to disable the listening port of the RADIUS client. 

By default, the listening port is enabled.  

Note that when the listening port of the RADIUS client is disabled: 

z 

The RADIUS client can either accept authentication, authorization or accounting requests or 

process timer messages. However, it fails to transmit and receive packets to and from the RADIUS 

server.  

z 

The end account packets of online users cannot be sent out and buffered. This may cause a 

problem that the RADIUS server still has the user record after a user goes offline for a period of 

time.  

z 

The authentication, authorization and accounting turn to the local scheme after the RADIUS 

request fails if the RADIUS scheme and the local authentication, authorization and accounting 

scheme are configured.  

z 

The buffered accounting packets cannot be sent out and will be deleted from the buffer when the 

configured maximum number of attempts is reached. 

# Enable the listening port of the RADIUS client. 

<Sysname> system-view 

[Sysname] radius client enable