3com S7906E Guide De Référence

 

1-20 

z 

If you repeatedly use the command to set the output rules for a module or for all the modules with 

the default keyword, the last configured output rules take effect. 

z 

After you separately set the output rules for a module, you must use the module-name argument to 

modify or remove the rules. The new configuration by using the default keyword is invalid on the 

module. 

z 

You can configure to output the log, trap and debugging information to the trap buffer, but the trap 

buffer only receives the trap information and discards the log and debugging information. 

z 

You can configure to output the log, trap and debugging information to the log buffer, but the log 

buffer only receives the log and debugging information and discards the trap information. 

z 

You can configure to output the log, trap and debugging information to the SNMP module, but the 

SNMP module only receives the trap information and discards the log and debugging information. 

Table 1-9 Default output rules for different output destinations 

Console 

default 
(all 
modules) 

Enabled warnings Enabled 

debuggin
g 

Enabled 

debuggin
g 

Monitor 
terminal 

default 
(all 
modules) 

Enabled warnings Enabled 

debuggin
g 

Enabled 

debuggin
g 

Log host 

default 
(all 
modules) 

Enabled 

informatio
nal 

Enabled 

debuggin
g 

Disabled 

debuggin
g 

Trap 
buffer 

default 
(all 
modules) 

Disabled 

informatio
nal 

Enabled warnings Disabled 

debuggin
g 

Log buffer 

default 
(all 
modules) 

Enabled warnings Disabled 

debuggin
g 

Disabled 

debuggin
g 

SNMP 
module 

default 
(all 
modules) 

Disabled 

debuggin
g 

Enabled warnings Disabled 

debuggin
g 

Log file 

default 
(all 
modules) 

Enabled 

debuggin
g 

Enabled 

debuggin
g 

Disabled 

debuggin
g 

 

# Set the output channel for the log information of VLAN module to snmpagent and to output 

information with severity being emergencies. Log information of other modules cannot be output to this 

channel; other types of information of this module may or may not be output to this channel. 

<Sysname> system-view 

[Sysname] info-center source default channel snmpagent log state off 

[Sysname] info-center source vlan channel snmpagent log level emergencies state on