3com S7906E Guide De Référence
1-6
Ring Level : 1
Node Mode : Edge
Active Status : No
Common port : GigabitEthernet3/0/3
Packet Link Common Complete Edge Major Packet
Direct Hello Down Flush FDB Flush FDB Hello Fault Total
------------------------------------------------------------------------
Send 0 0 0 0 0 0 0
Rcv 0 0 0 0 0 0 0
Common port : GigabitEthernet3/0/4
Packet Link Common Complete Edge Major Packet
Direct Hello Down Flush FDB Flush FDB Hello Fault Total
------------------------------------------------------------------------
Send 0 0 0 0 0 0 0
Rcv 0 0 0 0 0 0 0
Edge port : GigabitEthernet3/0/5
Packet Link Common Complete Edge Major Packet
Direct Hello Down Flush FDB Flush FDB Hello Fault Total
------------------------------------------------------------------------
Send 0 0 0 0 0 0 0
Rcv 0 0 0 0 0 0 0
Table 1-3 display rrpp statistics command output description
Field
Description
Ring ID
RRPP ring ID
Ring Level
RRPP ring level: 0 for primary ring and 1 for subring
Node Mode
Node mode: master node, transit node, edge node and assistant
edge node
edge node
Active Status
RRPP ring activation status: Yes indicates active and No indicates
inactive (An RRPP is active only if the RRPP ring is enabled and the
RRPP protocol is globally enabled)
inactive (An RRPP is active only if the RRPP ring is enabled and the
RRPP protocol is globally enabled)
Primary Port
The primary port field means the node mode is master node or transit
node. “-“ appears when the port is not configured on the ring or the
board to which the port belongs does not start, and in this case, no
corresponding statistics appears.
node. “-“ appears when the port is not configured on the ring or the
board to which the port belongs does not start, and in this case, no
corresponding statistics appears.
Secondary Port
The secondary port field means the node mode is master node or
transit node. “-” appears when the port is not configured on the ring or
the board to which the port belongs does not start, and in this case, no
corresponding statistics appears.
transit node. “-” appears when the port is not configured on the ring or
the board to which the port belongs does not start, and in this case, no
corresponding statistics appears.
Common Port
The common port field means the node mode is edge node or
assistant edge node. “-” appears when the port is not configured on
the ring or the board to which the port belongs does not start, and in
this case, no corresponding statistics appears.
assistant edge node. “-” appears when the port is not configured on
the ring or the board to which the port belongs does not start, and in
this case, no corresponding statistics appears.
Edge Port
The edge port field means the node mode is edge node or assistant
edge node. “-” appears when the port is not configured on the ring or
the board to which the port belongs does not start, and in this case,
no corresponding statistics appears.
edge node. “-” appears when the port is not configured on the ring or
the board to which the port belongs does not start, and in this case,
no corresponding statistics appears.
Packet Direct
Packet transmission direction on the port: Send or Rcv
Hello
Hello packet statistics received/sent on the port